How Much is a Beer Tap System?
Thinking of Installing a Beer Tap System?
Why do you need a good quality Draft Beer System?
Having an appropriate beer tap system is essential for running a successful bar or pub. When it comes to selecting a beer tap system, a wide range of options is available, and making the right choice often seems too complicated. Then there is the question of finances as being a business owner you want to keep the capital investment at a minimum while having a great design around your bar. To help you make an informed decision, we have decided to do a detailed analysis of how much a typical tap system costs and what kind of budget you should expect
Up to 6 Taps System ($2,200 - $6,900)
This sort of beer tap system is suited for low- to medium-sized pubs. Beer tap systems like these usually offer a maximum of 6 taps and use kegerators. These use air-cooling and are considered the simplest draft beer system that a bar can have.
Breakdown of the Costs
The cost of the tap-system depends on how many taps you want to buy and whether you want to buy them collectively or individually. If you decide to buy a basic 6-tap system then it can cost you in the range of $300-$500/each. Then you will need to buy a kegerator that depending on its capacity can cost you anywhere between $1000-$5500 for an average system. You will also need to buy couplers for attaching the beer line to the kegerator, you can expect up to $40-$60 per coupler. You will also need to buy a beer tower that will cost you in the vicinity of $500-$800. Then there are the costs for the CO2 tank and the regulators which will depend on your locality.
Pros
- In this case, the beer system installation will be very easy and you won't need much practice in operating it.
- It is very economical so you won’t incur a significant capital cost.
Cons
- As your kegerator will be placed directly beneath the bar table so it will take a lot of room.
- These kinds of beer tap systems don’t use standard kegerators rather they use smaller ones so you might have to change them more often.
- You can only offer up to 6 beers on tap options and some customers may not like this lack of choice.
Who should buy A DRAFT BEER SYSTEM?
You should only buy this beer tap system if you run a very small pub or if your budget is really tight. However, if your customer base only prefers a few beers on tap then you can consider using this beer tap system.
7-12 Taps System ($12,000 - $20,000)
Beers on tap are gaining popularity and that is why pubs prefer to have a larger selection available to their customers. For providing a wide range of options, pubs need larger beer tap systems and that is why having up to 12 taps seems more reasonable than having a basic kegerator system.
Thinking of Installing a Beer Tap System?
1. Long run system
These are used more commonly and there is a good reason for that. In the long run system, the kegs are kept very far from the bar. So, beer can get warm by the time it reaches the tap that is why we have to use a glycol system to keep it cool at all times.
2. Direct draw system
In a direct draw system, the kegs are stored in a cooler that needs to be nearby the bar table. As the distance between the keg and the tap is relatively short so an air-cooled system works just fine.
Breakdown of the costs
You can expect to pay $600-$800 per tap depending on how many you buy. You will need to buy a drip tray that can cost you between $250-$300. The cost of a glycol system depends on the distance of the kegs from the bar table and it can cost you between $1,200 to $5,300. Once you have bought the glycol system, you will also have to buy a trunk line that holds the glycol system along with the beer line. The cost of the trunk line depends on the length and usually starts from $15-$25 per foot. The larger the distance between the keg and the tap, the more it will cost. You will also need to buy a beer tower that will cost around $2,000-$5,000 for average tower designs. For the sake of estimation, you can expect to pay at least $1,000-$2,000 per beer on tap.
Pros
- It is much more efficient.
- You get to offer more beers on tap and hence attract more customers.
- You can keep all of your running and backup kegs in the same storage. Hence, it will be much more convenient to change a keg when it runs out.
Cons
- The initial investment is quite large.
- It needs to be properly maintained.
- Considerable practice is required to avoid any hiccups during peak hours.
Who should buy Beer Tap System?
This system is more suitable for larger pubs and bars that attract a lot of customers. If your bar is aimed to be towards the high-end then this system is the ideal choice. The initial investment is quite large but the ROI will be significant as well. Having a 12-tap system gives your bar a premium feel and being able to offer more beers on tap will allow you to increase your revenue and consequently increase your profit margin. However, if you are just starting a pub and your financial constraints are very tight then this system might not be the reasonable choice for you.
If you run a very large pub and want to offer more than 12 beers on taps then your requirements exceed everything available on the market. If this is the case then neither of the systems mentioned above will be able to fulfill your requirements. So, you should contact a reliable vendor for a customized quote. A reputable vendor will design a system that perfectly fits your needs and will also help with the installation of this customized beer system.
NEED A DRAFT SYSTEM INSTALLED?
Looking for top-notch draft beer system installation or repair services? Look no further than Brewskis! We are your go-to experts specializing in national commercial draft beer installation and local service/repair in Southern California. Based in Santa Ana, CA, we take pride in being the #1 draft beer system company in Orange County. With our experienced team and exceptional customer service, we'll make sure your beer flows smoothly and your customers are always satisfied. Cheers to a perfectly poured pint! 🍻
AUTHOR:
Brewskis Beverage Service
Brewskis Beverage is a draft beer service company that specializes in draft system repair, installation, and custom beer tower design.
LEAVE A COMMENT:
Need Help with Draft Beer System Repair & Installation?
If you're in need of a draft beer system, be sure to check out Brewskis Beverage. We offer a wide selection of direct-draw beer systems that are perfect for any business. We also offer repair and installation services, so you can be sure your system is always up and running. Contact us today to learn more!
Blog - Request a Quote
Search Post:
RECENT POST:
FOLLOW US ON FACEBOOK!
We would love to hear from you. Follow us on facebook to stay up to date with our latest posts and deals!
BRESKIS BEVERAGE
Looking for the right Draft System for your business? Look no further! Brewskis Beverage can help Repair, Install, & Maintain your new system to last you a lifetime.
QUICK LINKS
BUSINESS HOURS
- Mon - Fri
- -
- Sat - Sun
- Closed
FOLLOW US
CONTACT INFORMATION
Mike@BrewskisBev.com
1236 S Lyon St, Santa Ana, CA, 92705, United States